Seulement 1 article en stock !

Hot zone (WxHxL): 930x550x630 mm

Max temperature: 1000 °C

Charge: 1000 kg

Plus de fonctions...

Demander un devis

Revenir à la liste des produits.

Cliquer sur l'image pour voir la suivante
SOLO SOLO PH-8 | Fours sous vide usagés

The vacuum furnace allows annealing under protective atmosphere H and Ni for paraffin recovery before sintering.

The system is equipped with all the safety devices necessary for the use of flammable gas.

The installation complies with machine directives 2006/42/EC and EN 2006/95/EC, EN 2004/108/EC and EN 746.


Size (WxHxL): 3x3x3 m

Hot zone (WxHxL): 930x550x630 mm

Max temperature: 1000 °C

Charge: 1000 kg

Final vacuum: 1000 mbar

Operating vacuum: 1000 mbar

Max cooling pressure: 0 bar


The system consists of the following components:

  • Horizontal electric furnace, type SOLO PH -8.
  • Wax recovery tank.
  • SOLO gas distribution cabinet.
  • Electrical control box.


  • The frame is made of sheet metal and profiled iron.
  • Refractory steel muffler comprising two vertical walls to optimize gas circulation, slightly sloped to allow wax evacuation and equipped with rails to center the load to be treated.
  • Heating with resistors integrated into the ceramic modules that can be quickly exchanged.
  • Hingeless, side sliding door for better accessibility, with cooled gasket and stirring turbine. The door is held on the oven with 4 manual vices and 4 hydraulic vices.

The gas and paraffin recovery tank is made of stainless steel, removable for easy emptying and is securely attached to the vacuum furnace. It collects liquid wax (capacity: 25 L) and the protective gas that is burned at the exit of a stack integrated in this tank.
A heating system is integrated to keep the wax in liquid form.

Demander un devis

Ne manquez pas cette opportunité, nos fours à vide reconditionnés sont très demandés.

(*) champs obligatoires